1
- Year
- 2026-09-14 17:31
- Category
- Tool Talk
Posted in: Tool Talk
Self Drilling Drywall Anchors: What Held My Walls Together
If you have ever stared at a bare stud bay and wondered how to hang anything without tearing the wall apart, these self drilling drywall anchors are the $9.99 answer I keep coming back to in Greenville. The KURUI 140Pcs #8 Self Drilling Drywall Anchors and Screws Kit needs no pre-drilled hole, just a screwdriver, and it is rated to 75 pounds. Measure twice, cut once, write it down — and this time I wrote down every anchor.
Why Hanging Things on Drywall Goes Wrong
I will lead with the mistake. During our living room renovation before and after push, Jenna wanted floating photo shelves up before Ellie’s birthday. I found studs for the middle shelf, missed them for the sides, and tried old hammer-in plugs from a coffee can. Half spun. One blew out a quarter-size crater.
That is why people search for no drill drywall anchors or heavy duty drywall anchors for sheetrock. Nails hold almost nothing in 1/2-inch drywall. Cheap plugs crack, spin, or leave big holes. Nobody wants to drag out the drill and shop vac just to hang a curtain rod.
“I’ve bought a lot of these over the years and most of them did more damage than good. Most left big holes in the walls. These are good and they work.”
— Kobesan, 5.0 out of 5 stars, Verified Purchase
What This #8 Drywall Anchors Kit Actually Is
It is a 140-piece #8 self-tapping kit: 70 white nylon self drilling drywall anchors plus 70 galvanized Phillips screws in a divided case. Hard nylon mixed with glass fiber, deep threads, sharp pointed tip. Twist straight into drywall until flush, then drive the screw. No pilot hole, very little dust.
I cover this in my Tool Talk tool reviews — I bought it, I used it, I will tell you. Same logic as that small-project trim work with a 4-inch foam roller kit I tested.
No Pre-Drill Install
Sharp tip twists in with a screwdriver, less dust and no bit changes.
75LB Deep-Thread Grip
Large threads cut into drywall for pull-out resistant hold.
Nylon + Glass Fiber
Hard, wear-resistant plastic that resists cracking.
140-Piece Case
70 anchors + 70 screws, organized for punch lists.
Specs I Logged Before I Hung Anything
Here is the ledger, straight from the listing and my tape measure. For the money side, see real renovation costs in The Red Pen.
| Spec | Detail |
|---|---|
| Product | KURUI 140Pcs #8 Self Drilling Drywall Anchors and Screws Kit, No Drill Hole |
| Count | 70 anchors + 70 galvanized Phillips screws |
| Material | Nylon + glass fiber; galvanized screws |
| Max hold | Up to 75 lbs in drywall |
| Size / Color | #8 / White, 1.9 x 3.1 x 5.4 in case |
| Rating | 4.4 out of 5, 4,656 ratings, $9.99 |
Three Places These Anchors Earned Their Keep
1. Curtain rods and picture ledges. Studs are 16 in. on center. Brackets never are. Two anchors per bracket held my 6-ft rods solid.
“These self-drilling drywall screws work exactly as expected. They go in easily, hold securely, and make the job much quicker.”
— Donna M, 5.0 out of 5 stars, Verified Purchase
2. Bathroom and kitchen accessories. Towel bars and spice shelves get yanked daily. Deep threads hold better than old plugs.
“I bought these for one project and have already used them for three. Wall plant hangers, a railing and a mirror — are secure.”
— Kailey, 5.0 out of 5 stars, Verified Purchase
Pair with small living room ideas that stretch a tight budget — small hangs make a room feel finished.
3. Replacing box hardware.
“Whenever we get something wall mounted, I throw away the product’s mounting hardware and use these. Mounting into a stud is best, but when that isn’t feasible, these run a close second.”
— Kenneth R. Van Wyk, 5.0 out of 5 stars, Verified Purchase
That call — stud vs. anchor — is the core of my room-by-room renovation diary.
What I Got Wrong
If you hit a stud, stop. Do not force plastic into wood. Back out and drive the screw into the stud.
“I hit a beam and went to put the plastic thing in and it ended up leaving a huge hole.”
— Kayla O’loughlin, 4.0 out of 5 stars, Verified Purchase
Do not over-torque past flush or it will spin. Use a fresh #2 bit, go slow.
“Very easy to install into sheetrock. I wish the screws were better quality or a deeper Phillips pattern.”
— nice, 4.0 out of 5 stars, Verified Purchase
More lessons in quick fixes in The Punch List.
The Value Math on a $9.99 Box
140 pieces is about seven cents per piece. Two small branded 4-packs at the big-box store cost more than this whole case. No appraiser pays extra for curtain rods, but solid hangs photograph better and avoid patched blowouts.
Drywall Anchor Questions I Get From Neighbors
Can I install these without a drill?
Yes, for 1/2-in. drywall. Press the tip in and turn with a #2 Phillips screwdriver until flush. Low-clutch screw gun is faster, hand-driving gives better feel.
How do I know if I hit a stud?
Resistance jumps. Back out, probe with a nail or finder, and if wood, skip plastic and drive the screw into the stud.
What weight per anchor?
Rated up to 75 lbs static shear. I treat 15–25 lbs per anchor as comfortable, always two+ anchors for wide items.
Plaster, tile, or concrete?
No — drywall only. Plaster, tile, brick need masonry bits and rated sleeves.
Remove and reuse?
Screws yes, anchors if clean. Patch with spackle, sand, touch up. Keep spares from the case.
Why does it spin?
Over-tightening past flush or crumbly drywall. Fill, cure, reset fresh anchor an inch away.
I am Travis Bishop in Greenville, SC — ex-appraiser, keeper of spreadsheets. Measure twice, cut once, write it down.
Comments
No comments yet — be the first to share a thought.